CNC SINGLE-COLUMN HYDRAULIC PRESS MACHINE - Products

RIYI products

CNC Single-column Hydrauli

Movable Table Hydraulic Ma

FOUR-COLUMN HYDRAULIC PRES

GAS-LIQUID MIXED PRESS MAC

PNEUMATIC PRESS MACHINE

RIVETING MACHINE

SERVO PUNCHING MACHINE

FULL-AUTOMATIC MULTI-STATI

sales of Fangbo

YUHUAN FAGBO MACHINERY CO.,LTD.
Add: Huxin Industrial Zone, Chumen,
Yuhuan, Zhejiang, China.
Mobile:18968585590/13967655592
Tel: +86-576-87216855
FAX: +86-576-88327460
E-mail:fangbocn@163.com
P.C: 317600

Your location：Index >> Products >> CNC SINGLE-COLUMN HYDRAULIC PRESS MACHINE CNC SINGLE-COLUMN HYDRAULIC PRESS MACHINE

FBY-MTC10 Series of Movable Table Hydraulic Machine

1.C type body,the body after high temperature aging treatment,good rigidity small deformation.
2.In order to ensure the safety of operator, configuration of the mobile worktable (pushing cylinder) makes the feeding,feeding in the head outside the security zone; for the relatively large size installation and disassembly need space largeworkpiece; pressing precision is equivalent to the traditionalhydraulic machine.
3.Using PLC control, on the screen to set arbitrary movement speed, pressure, time, under the pressure of high position precision, reliable performance.
4.Equipped with hydraulic sensor and pressure sensor, display the actual pressure, can set the pressure detection range, product testing the pressing is qualified, product in the pressing process of undervoltage automatic alarm and shutdown.
5.Hydraulic system pressure stable performance, high precision, large range of adjusting pressure.
6.Safety design of automatic operation and hand operation, with emergency stop and jog up and down function.
7.Spindle down with the fast and boost work into two kinds of speed, the fast forward improve work efficiency, pressure feeding speed can be adjusted in a certain range, improve product assembling quality, protect the mould and products.
8.Using the manual button and the pedal two cycle start modes.
9.The control system adopts imported famous brand products, high-end PLC, touch screen by Siemens, Mitsubishi, valiant and other high-end brands, hydraulic system adopts imported double proportional valve system (see the specific configuration configuration list).
10.The seal using the NOK and Taiwan tripod base.
11.Infrared operation safety induction device (according to customer demand matching).
12.Failure warning, pre-diagnosis, fault diagnosis function (optional).

FBY-CC-P Series of Fast CNC Single-column Hydraulic Press

1.The C-body design, whole body casting,stable performance, use small space and easy to operate.
2.With PLC control,easy programming process control action,positioning accuracy, high precision.
3.Equipped with pressure sensors,displays the actual pressure,pressure range can be set to detect the product is qualified or not.
4.Safety designed,using both hands to operate,with emergency stop button and jog up and down function.
5.Key and Foot Switch two cycle start modes.
6.Control mode can change according to customer requirements.
7.Widely used for bearings,gears and other precision press-fit parts.
8.Infrared protection and Pressure sensor can be configured (Optional).
9.Failure warning, pre-diagnosis, fault diagnosis function (optional).

FBY-EC Series of High Precision CNC Single-column Hydraulic Press

1.The C-body design,whole body casting,After high temperature aging treatment,rigid and stable,The deformation is small.
2.PLC control,on the screen can be arbitrary set speed,pressure time,repeated high positioning accuracy,good performance.
3.Equipped with sensors in hydraulic system and pressure sensors,display actual pressure,Pressure detection range can be set,Detection of press-fit products are qualified,Products in the process of pressing,overvoltage and undervoltage will automatically alarm and shutdown.
4.The whole hydraulic system,the pressure is strong,the work performance is stable,The accuracy of the pressure is high,the adjustment range is large.
5.Security design,using both hands to operate,with emergency stop and jog up and down function.
6.Spindle down,with two speeds,fast-forward and slow forward,fast forward speed is fast and can improve work efficiency;Slow forward speed can be adjusted,to improve the quality of press-fit, protection of mold and products.
7.Two of the cycle start-up mode:buttons and pedals.
8.The whole control system is using imported high-end brand-name products,PLC,The touch screen is the use of high-end brands such as Siemens,Mitsubishi,Wei Lun,The hydraulic system is the use of imported dual proportional system valve (Specific configuration,see the configuration list).
9.The seal is NOK from Japan and Taiwan tripod base,hydraulic fittings using brand-name products of taiwan.
10.Infrared protection device(according to customer's requirements).
11.Failure warning, pre-diagnosis, fault diagnosis function (optional)

FBY-KC-P Series of CNC Single-column Hydraulic Press Machine

1.The C-body design, whole body casting,stable performance, use small space and easy to operate.
2.With PLC control,easy programming process control action,positioning accuracy, high precision.
3.Equipped with pressure sensors,displays the actual pressure,pressure range can be set to detect the product is qualified or not.
4.Safety designed,using both hands to operate,with emergency stop button and jog up and down function.
5.Key and Foot switch two cycle start modes.
6.Control mode can change according to customers requirements.
7.With a filling valve,have a high speed.
8.Widely used in parts of the press forming, stretching,bending,punching, stamping, shaft alignment and press-fit etc.
9.lnfrared protection,under cylinder,and Pressure sensor can be configured(Optional).
10.Failure warning, pre-diagnosis, fault diagnosis function (optional).

1 2 Next End