SPECIAL PURPOSE EQUIPMENT CAN BE TAILOR-MADE - Products

YUHUAN FAGBO MACHINERY CO.,LTD.
Add: Huxin Industrial Zone, Chumen,
Yuhuan, Zhejiang, China.
Mobile:18968585590/13967655592
Tel: +86-576-87216855
FAX: +86-576-88327460
E-mail:fangbocn@163.com
P.C: 317600

Your location：Index >> Products >> SPECIAL PURPOSE EQUIPMENT CAN BE TAILOR-MADE SPECIAL PURPOSE EQUIPMENT CAN BE TAILOR-MADE

Numerically-controlled 6-station hydraulic tube shrinking machine

1.control ensures high output force and stable pressure, which facilitates shrinking and forming of pipe fittings. Radical pressing force of workpieces is adjustable to ensure workpieces have enough clamping force and will not slide backwards during processing. Specific circumstances are as follows: (1) Slightly add abutted seam size of upper/lower clamping parts, upper seaming chunk presses downwards to touch workpiece, afterwards hydraulic pressure goes up to preset value which is tested by the pressure sensor imported from Germany and is transformed to be output through PLC input treatment so as to realize pause of downward pressing while reaching preset pressure value. This course is completed instantly. As various deformations of tubular materials in time of tube shrinking might further shrink the external diameters of the clamped tubular materials, energy accumulator is added to hydraulic system to ensure that pressure can be timely upplemented so as to effectively control impact deformation degree in time of diameter shrinkage of tubular materials. (2) After hydraulic lock is added to hydraulic system to avoid tight clamping, a small amount of hydraulic oil backflows due to inner hydraulic leakage. (3) Surface roughness of clamping device is increased to 0.4. (4) Length of clamping device can be extended to increase contact area instead of damaging workpieces.r hydraulic lock is added to hydraulic system to avoid tight clamping, a small amount of hydraulic oil backflows due to inner hydraulic leakage. (3) Surface roughness of clamping device is increased to 0.4. (4) Length of clamping device can be extended to increase contact area instead of damaging workpieces.e extended to increase contact area instead of damaging workpieces.
2.Workpiece forming molds have 8 sets, including 6 sets of molds that relies on servo motor ball screw and linear guide rail to move forward and backward. Coder positioning and grating ruler distance measuring ensures that positioning precision is less than 0.01mm. Positioning range can be adjusted optionally. Clamping for many processing procedures can be finished at one time to ensure product precision.
3.Left/right ends tube-shrinking cylinder and 2-station movable cylinder adopt proximity switch control combined with mechanical hard limit to limit stroke, being adjustable.
4.Stroke and pressure of workpiece pop-up end limit oil cylinder is adjustable to meet clamping and positioning requirements for different workpieces.
5.Operation, pressure, stroke and speed can be modified easily on the operation controlling machine.
6.To meet the growth requirement of your company, front mold sleeve is supplemented between two operating positions and large mold can be added. Furthermore, inner mold installation position is supplemented and can be dismantled in no use.
7.Meet the requirements of operators and on-site operation:leave certain space on console to put workpieces (space with 399mm vertically and 933mm horizontally); leave space enough space for operators to operate the machine conveniently.

Oil cylinder test console/oil pump test console

1.4-column type machine body is under balanced stress and has pretty appearance.
2.This equipment adopts force sensor, PLC and touch screen to form intelligent operation system. Data can be output through USB interface.
3.Parameters like pressure, displacement, time and count can be set and displayed on the touch screen.
4.Displacement and pressure of auxiliary oil cylinder can be set and displayed on the touch screen.
5.System pressure can reach 32Mpa, and leakage and unstable pressure of tested oil cylinder or pump can be detected and an alarm is given afterwards.
6.It is professionally designed to test two kinds of products, oil cylinder oil pump. In time of testing oil pump, automatic oiling can be realized to ensure high work efficiency.

FBT-SI系列扭矩检测台

1.Applied to torsion testing for auto steering ball joint parts (similar to this product).
2.Torsion testing range: ±20N.M.
3.Easy operation, flexibility and strong universality.

FBT-ZLB Series of Special assembly machine for power-assisted steering pump belt pulley

1.This machine has compact structure, covers small space and can be easily operated.
2.Professional design solves the assembly technological problem of power-assisted steering pump belt disk.
3.This equipment adopts PLC, hydraulic pressure sensor and touch screen to form intelligent control system, which ensures easy operation.
4.Parameters like main shaft rotary speed, oil cylinder stroke, pressure, speed and count etc. can be set on the touch screen.
5.Real-time display of tension curve can be realized. Required product tension range can be set optionally. Assembled products can be inspected to be qualified or unqualified.
6.Movement velocity of main shaft driven by step-by-step motor is controllable and response speed is fast.
7.Inching/automatic/full-automatic functions can be switched mutually. Automatic function can be realized through operation by both hands or foot switch.

FBY-TRC30 Series of Auto Tie Rod End Press-fit Plane Hydraulic Press Machine

1.C Shape polar design. The body has been heat processed in high temperature, therefore, it has good rigidity and little transformation.
2.The PLC control is adopted to make sure that process speed, pressure and time can be freely set on screen with main axis precise position and good reliability.
3.The full oil hydraulic systemis adopted to provide remarkable pressure, stable performance, high precision and wide adjusting range.
4.The pressure detecting range can be set to check if the press fitting product is qualified or not. The over-pressure or pressure shortage during press fitting will trigger warning and stop the machine automatically.
5.Safe Design: it adoptsdoublehand operation mode, whilethe emergency stop and slight moving function are well equipped.
6.The upper mould can be moved aside while it’s not working. It’s suitable for installing ball headed rod and other rod style parts.
7.There is a head cylinder under the platform with adjustable heading time. It can serve for material installation and uninstallation.
8.The downward speed of main axis can be set to fast-moving and pressure-increasing mode. The fast-moving mode can improve working efficiency while the mode can be adjusted to improve the press fitting quality for the sake of protecting mould and product.
9.The product offers start button and foot-on button to start circulation.
10.The sealing components adopts NOK in Japan and Dingji Group in Taiwan, while the hydraulic components are famous brands from Taiwan.
11.The product is equippedwith torque detector to test the riveting quality of ball headed components.
12.Failure warning, pre-diagnosis, fault diagnosis function (optional).